Our Full Chip Lexia 3 is A+ Quality REV C. We only sell A.1281Z Interface model from 2019 which is compatible with models up to 2020+. This is the same tool as Citroen and Peugeot dealers use in their garages. Comes with Lexia, PP2000, and Diagbox 8.17 software on DVD with full step by step install video.
Supported Car Models:
CITROEN MODELS :
C-Zero / C1 / C2 / C3 / C3 PICASSO / DS3 / C-ELYSEE / C4 / C4 CACTUS / C4 PICASSO / DS4 / DS 5LS / C5 / DS5 / C6 / C8 / C-CROSSER / C4 AIRCROSS / NEMO / BERLINGO / JUMPY / JUMPER / AX / SAXO / BX / ZX / XSARA / XANTIA / XM / EVASION / C15 / FUKANGFUKANG 988 / ELYSEE / C-ELYSEE(R3) / C-TRIOMPHE / C-QUATRE.
PEUGEOT MODELS :
iON / 107 / 108 / 206 / 207/ 207+ / 208 / 301 / HOGGAR / 307 / 308 / RCZ / 407 / 408 / 508 / 607 / 807 / 1007 / 2008 / 3008 / 4007 / 4008 / 5008 / BIPPER / PARTNER / EXPERT / 106 / 205 / 306 / 309 / 405 / 406 / 605 / 806.
Supported Languages :
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.
Hardware and software requirements :
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows XP, Vista, 7, 8, 10 with the latest service pack installed.
(if the vehicle you intend to scan is before 2006 Diagbox software MUST be installed on a 32bit operating system only).
Supported functions :
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1. Read Identification :
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read Fault Codes :
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear Fault Codes :
this function clears all stored fault codes and other diagnostic information.
4. Auto-Scan (Complete Car Scan/Test) :
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values :
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator Test :
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Package Includes :
1 x Main unit with extension OBD2 cable
1 x Long 9pin to USB cable
1 x Short 9pin to USB cable
1 x OBD2 cable
2 x Instruction for Installation and Activation DVD for Diagbox 8.17